| |
| Model |
MPS 5000 |
| Rating |
5KVA |
| AC INPUT |
230V +20% -30% Single
Phase Input |
| Frequency |
50Hz ± 10% |
| DC VOLTAGE |
120 / 144 VDC |
| Charging Time |
12 Hours for 90% of full Capacity |
| Charger Type |
CVCC Internal Controlled Rectifier type |
| |
| INVERTER: |
| Technology |
IGBT / MOSFET |
| Output
Voltage |
230V AC Single Phase |
| Voltage
Regulation |
±2% % for DC I/p variation & o/p load variation |
| Frequency |
50Hz ± 0.5Hz |
| Waveform |
PWM
Sine wave |
| Harmonic
Distortion |
Less
than 3% |
| Inverter
Efficiency |
>90% |
| Power
Factor |
0.8 |
| Overload |
150%
for 30sec |
| Crest
Factor |
3:1 |
| Audible
Noise |
Less
than 45 dB at 1 Meter |
| |
| METERING: |
| Microprocessor based Digital LCD Meter for |
Output Voltage, Output current & Frequency, DC Voltage , Battery and Load Percentage |
| |
| GENERAL: |
| Dimensions
(LxWxH)mm |
650 x240 x500 |
| Operating
temperature |
00C to
500C |
| Humidity |
Max 95%,
Noncondensing |
| |
| PROTECTIONS : |
| Output
Overload & Short circuit, Output
Under & Overvoltage, DC Under & Overvoltage |
| |
| INDICATIONS
& ALARMS |
| a) Mains on |
Indication |
| b) Inverter on |
Indication |
| c)
DC Low |
Indication & Alarm |
| f) Fault |
Indication & Alarm |
| g) Output Overload |
Indication & Alarm |
| |
| CHANGEOVER |
| |
|
a) Electomechanical Relay |
Provided as Standard feature |
| |
|
b) Static Switch(Optional) |
Bi-directional |
|
|
|
|
| |
|
|
|
| * Specifications are subject to change without prior notice
due to constant improvement in design & technology |
